106. Garden Tour – First Day of Summer

We have been blessed with both sun and rain in good measure, so the garden is growing great. This is a picture-heavy post – no deep thoughts here, except to say:

Nothing brings more peace and meditation to my day than sitting or crouching in the garden, weeding, for an hour or so. The birds are diverse, and their songs and activities make my serotonin levels surge. Fortunately for me, there is no shortage of weeds to offer me those daily opportunities for quiet contemplation.

There are also garden pests – it seems like a new one pops up in profusion each year.

Pulvinaria acericola (cottony maple leaf scale)

Pulvinaria acericola (cottony maple leaf scale)

Tomato plants chomped on by deer

Tomato plants chomped on by deer

Unidentified greenhouse pest damage

Unidentified greenhouse pest damage

But right now is the best time in the garden. Here’s a shot of my medicinal garden.

and rooftop garden:

I have started to harvest raspberries:

The new beehive:

(The digging in the upper left of the photo above is the beginning of our Hugelkultur bed. We’re filling it with wood/log green waste, and our compost and mulch on top. It will require no watering all summer, adding to our existing xeriscaped yard.)

We have a small orchard beside the studio, with a frost peach, two apple trees, and raspberries. The deer broke into the fence, and did some damage, but I caught it early. This is not a great photo, but it’s hard to get a view:

Tireside garden

Tireside garden

and a bunch of other shots:

herb tower on deck

herb tower on deck

cucumbers in greenhouse

cucumbers in greenhouse

Mason bee condo

Mason bee condo

granny's roses

granny’s roses

I hope you enjoyed the garden tour at This Green House. Seeing it all in one post makes me appreciate our garden anew.

Sharing with these lovely parties:

Sunny Simple Life, Life on Lakeshore Drive, Over the Moon, Amaze Me Monday, June Garden Party with Friends, Coastal Charm, Cozy Little House (FEATURED!), Talented Tuesday, Savvy Southern Style (FEATURED!), Creative Muster Party, DIY By Design, Simple Nature Decor, Rooted in Thyme (FEATURED!), Hometalk #LandscapeLove

 

 

 

104. Beekeeping

D has long talked of keeping bees.

I’m trying to encourage him to retire, yet I’m slightly trepidatious about it. Will I need to entertain him all the time? Or, will he develop/revisit some of his own hobbies and social circles?

To that end, I bought him a starter beehive kit for his birthday. Except, it was a little hard to conceal. When I brought it home, I was all in a tizzy. I had just returned from a couple of days in the city, and had to get the house ready and food shopping done for weekend company. Our nephew carried the kit into my studio, where I thought it would be safe from D’s observation, but when he came home a couple of hours later, he gave our great-nephew a tour of the yard, AND studio, so the surprise was ruined.

He is keen, though, and has read some books, taken a beginner bee-keeping course, talked to our friend who is a beekeeper, and ordered a “nuc” (for “nucleus”), which is a small starter bee colony centered on a queen (of course!.)  “Small” is a relative term; in this case it means 20,000 bees as a full, functioning hive has about 50,000 bees.  In fact, the hive will spend most of the summer growing and will not, as a result, produce much excess honey.  It will need most of its honey for the winter.

The race was on – he needed to build a bee deck to house his first and future hives.

In true Green Life spirit, I noticed a deck demolition going on in our neighbourhood, and thought the lumber being discarded looked re-usable. D picked up a truckload of it, then spent a full day removing nails. What a green hero in Carhartts!carhartt guy reclaiming lumberHe first needed to locate the deck in the yard. An open location that has southern exposure and gets sun almost all day (but has occasional shade) is best, as bees need warmth in the winter and especially in the morning. Even I have noticed that the bees only leave their hives in nice weather.

D built a substantial deck. He never does things by halves. I envisioned insubstantial rebar posts to hold the requisite electric fence. I say requisite, because we have black bears in our neighbourhood, and if you read Winnie The Pooh, you will know that bears LOOOOOVE honey (Bee Fact: it’s actually the embryonic bees – like grubs – that they like.  The honey is their dessert).

But, did I tell you D favours substantial? His bee deck, how can I say this, did not exactly blend in with the environment. I painted it the same green as the house (Behr’s Ponderosa.)  Bee books advise to shoot for “inconspicuous”, just in case neighbours (who are very rarely, if ever, bothered by nearby hives) are nervous.That helps.

D built a stand to perch his hive on, and installed the electric fence. It has about 6,000 volts but fear not; extremely low amperage – touch it and you’ll definitely feel it, but will be unharmed.From our garden shed, I requisitioned a ceramic green plant tray, and filled it with beach glass for the bees to stand on while they’re drinking, so they won’t drown.

Now, we’re ready for our new tenants.

D and his friend went to the city to pick up their nucs of Carniolan bees. Because the bees are coming to a restricted zone, where all bee hives are registered, the breeder has the nuc inspected for hive beetles before they leave her bee yard. The bee breeder simply transfers her 5 frames into the centre of their new hive, making sure that the queen is present.nuc transfer

Then, with all the openings sealed with tape and screen, so the bees don’t wander off while they’re being moved to their new homes, the new hives were put into the bed of our truck, strapped down securely, and covered with a damp drop cloth. D moved his nuc to the bee deck, and smoked the hive to calm the bees down before he released them to do their important work in our yard and all the yards of our neighbourhood. In the photo below, he is adding the food trough; he mixed about 2 litres of 1:1 water:sugar syrup as a starter.  Most bees don’t need to be fed at this time of year, but ours will need a couple of days to get oriented and find their flowers.

The bees lounged around for a few minutes, and then they started exploring. It was exciting!

So much to learn from and about these creatures. Welcome home, bees.

Sharing with: Amaze Me Monday, Rustic & Refined, Backyard Neighbour, Our Home Away From Home, Kathe With an E, Talented Tuesday, Savvy Southern Style, Poofing the Pillows, DIY By Design

103. Live-edge Slab Bed Construction

This I cannot claim responsibility for (well, I do have some responsibility for giving birth to the person):

But, Tess, the genius behind the bed, has given me permission to share her bed-making process.

And, she did use our tools and reuse some of our collected materials, so I guess you could say we had a small, small hand in it. She used wood and tools that have personal memories and meaning wound through them.bed-labelled copy

At the Christmas holiday, Tess and her partner picked up some well-cured maple slabs at a local supplier, Steve Willgoose Woodworking

Here they are after a bit of cleaning up – debarking, digging out soft areas, some sanding.

Tess’s first order of design was to size and position her bowties. They stabilize the major cracks.

She cut them, mostly on the bandsaw, out of shim wood scavenged from the beach on Haida Gwaii, where she was fortunate to spend a university semester.

Using a drill and Grandpa’s chisels, T routed out the bowtie shapes. When one of the bowties was too small for its setting, she had just enough of the wood left to make another one. Next step was applying copious amounts of wood glue – those little suckers will stay there – and pounding them in with a wood block.

She sanded them down to flush, and sanded the whole slabs to a beautiful smooth surface that we can’t stop stroking. Between the first and second sandings, she raised the grain and the wood fibre with a water-soaked rag, and then let it dry. That made a much smoother surface possible.

T filled the long teardrop-shaped hole with stones collected from Ucluelet and Iceland. She taped them in place from the front with a combination of duct tape and painter’s tape, then turned the slab over to fill the hole with 2-part clear epoxy. A sheet of plastic covered the work table. When she poured in the epoxy, it looked pretty good, but soon we could see that the dam had burst (or should I say “Damn! Burst!”) and the epoxy was leaking out as fast as water. It covered the plastic, and spread onto the front surface of the maple, even started dripping onto the floor.

This turned out to be the most frustrating lesson learned, and she just had to let it cure for a while until it was hard enough to clean up. You don’t want the epoxy all over your hands and clothing – it’s impossible to clean, even with paint thinner. She mopped up with rags as best she could, and then faced the problem again after a sleep.

Once it was firm enough to sand, T sanded the epoxy and the imbedded (NPI – no pun intended) tape off the surface of the wood and stones She had to resort to digging some of it out with sharp instruments, like my 1/2″ belt sander.

I think Tess consulted her brother, who has considerably more experience working with epoxy and wood slabs. He tapes off the hole, then clamps wood tightly against the tape so the epoxy has nowhere to leak. The second pouring of epoxy went better. Here’s a view of it from the back of the headboard, so you can see the light shining through:

She shaped and sanded the elegant bedposts – the headboard posts from a 4 x 4 clear cedar post, and the footboard posts from a beautiful salvaged fir porch post of her grandfather’s.

Using hardwood dowels and glue, T attached the head/footboards to the posts. I didn’t take photos of this step.

The bed rails are made from purchased S4S fir 2x8s with a 1×2 slat ledge screwed to the inside edge. The rails are attached to the posts with hardware from Lee Valley Tools. Here, the assembly crew is checking the bed for square:measure bed for square

The fir slats I salvaged from a former film studio warehouse have hardened with age – they may be 50 years old or more. Tess was commanded to lie down on them to make sure they’re strong enough, but I knew they were, because we used the same ones in our pull-out wall bed in the studio.live edge maple bed

I will transport the bed components to the city, where T will apply the finish and will update with another photo of this beautiful/meaningful project.

I learned so much from watching Tess work. This chronicle leaves out much of the design process and constant figuring and measuring. I am full of admiration for Tess’s skills, and I know she has learned a whole whack of new ones.

 

Sharing with: The Dedicated House, Cozy Little House, Home Stories A to Z

100. Chocolate Soap and Massage Butter Recipes

Tomorrow is our “Death By Chocolate” murder mystery night with the ladies of our ‘hood. I’m one of those weirdos who doesn’t crush on anything chocolate.

But, I love the smell of it. And I AM crushing on making soap these days.

So, I made chocolate soap and chocolate massage butter to give to the 13 participants.

Following are the recipes. But, first a caveat: cold process soap has safety requirements and processes that I won’t go into here – there are plenty of YouTubes and online instructions. See my first post about soap.

Chocolate Peppermint Soap (makes 12 bars)

Melt and cool to 110˚: 16 oz soybean oil (Crisco), 7 oz coconut oil, 3 oz cocoa butter, 2 oz shea butter, 4 oz olive oil

Using mask and protective clothing and rubber gloves, and avoiding breathing the fumes, slowly pour and stir 5 oz lye into 2 cups distilled water. Let cool to 110˚.

Add lye to oils, and blend with a stick blender.

Add at trace: 2 tsp peppermint essence, 2 Tbsp cocoa powder

(To get two-toned soap, I added the peppermint to the mix, poured about 1/3 into another cup, then added the cocoa to the other 2/3 before pouring it into the molds.)

After 24 hours, remove from molds, cut into bars, and let it cure for 4 weeks.

Chocolate Massage Butter, on the other hand, doesn’t use lye and it’s quick and easy to make. It makes a wonderful gardener’s hand cream and cuticle cream, too, because of the nourishing, healing oils.

  • 4 oz olive oil
  • 4 oz cocoa butter
  • 4 oz shea butter
  • 4 oz coconut oil
  • 1 oz beeswax (pellets or grated)
  • 2 tsp vitamin E oil
  • 1 cup distilled water (at room temperature)
  • 2 Tbsp cocoa powder
  • Melt the oils (except vitamin E oil) with the beeswax, and cool them until they just start to harden. While cooling, whisk the cocoa powder into the water, then slowly add it to the oils as you blend thoroughly with the stick blender.Stir in the vitamin E oil. Pour into 4 oz jars. Let cool, cover, and store in the fridge for up to a year.

Makes 8 x 4oz jars.

Smells good enough to eat. And you could, as long as you don’t mind a bit of beeswax!

 

Sharing at these blog parties:

DIY Vintage Chic, DIY Showoff, Chalk and Chocolate, Cozy Little House

96. Soap and Christmas

2015 christmas treeChristmas around here is uproarious. With 6-9 young adults and two dogs coming and going, games and food are constantly on the table, or in the case of the dogs, on the floor (for a split second.)In a rebellious moment, I decided to eschew all the traditional Christmas tree decorations and simply use the Chinese lantern (Physalis alkekengi) skeletons from the plants originating with a gift our niece gave me 3 years ago, plus pine cones, and birds. Thankfully, the ‘kids’ did most of the placement, so I didn’t have to climb those ladders.

The dishwasher and clotheswashers are in full throttle. Sauna and steam room likewise. Space heaters and seasonal lights, too.  We all use much more energy than little ol’ D and I use when we’re here alone.

The whole point of Christmas is to spend time together as a family. Over the years, we’ve reduced our commercial footprint to nearly nil. Now, we each contribute a small, often hand-made gift to each other’s stocking. Each year, I’m impressed anew with the thought and originality of each person’s contribution.hemlock with jack-o-lantern plant

I’ve long wanted to learn to make soap, and a short lecture at our local botanical garden got me started. I managed to make three kinds of soap (Skin Rx hockey puck, eucalyptus, and calendula/borage), some beard balm and beard oil, and foot soak for the stockings, and it was fun!

To make cold-process soap, the basic ingredients are lye, water, and oils. There are plenty of recipes online, and it’s important to learn about the process before you make a batch, because the lye can be dangerous, the proportions of oils to lye vary depending on the oils used, and the additives must be added at a certain stage. My goals are to use organic and vegan ingredients as far as possible.

I’m most proud of my hockey puck soap (so Canadian) – it’s got activated charcoal and a luffa sponge that I grew myself (seeds from West Coast Seeds.) Activated charcoal is often used in face masques to detoxify skin and scour out bacteria.

This is what the Miriam Sponge Gourd (loofa) looks like:loofah Collage

And here are my proportions for Hockey Puck Skin Rx soap (basic recipe courtesy of Lexi, the teacher):

19 oz olive oil (pomace), 15 oz palm oil, 8 oz coconut oil, 3 oz sweet almond oil, 6.1 oz lye (NaOH), 14.9 oz distilled water, 1 oz lemon grass oil, 1.5 oz activated charcoal, 1 loofa sponge

I lined a 3″ pvc pipe, 12″ long, with baking parchment paper, taped plastic to the bottom, inserted the loofa, and poured the batter all around (beaten to a light trace – you will learn about this when you research.) After 72 hours, the soap had dried enough to shrink it, allowing me to slide it out of the tube. I cut it with the paper still on, which helped to hold it together, using a sharp filetting knife.

For another stocking gift, I used some old (clean) socks to corral soap nuts, which are actually the husks of nuts grown in India (purchased at The Soap Dispensary in Vancouver, BC, Canada, also available at many online soap-making suppliers.) They create a lather, and the little packets should wash 6-8 loads of laundry.soap nuts

And, just to give you a little giggle, here is the floor below our poor Charlie Brown bush-found hemlock (I requested a fir), 4 days after we installed it:dropping hemlock needles Thanks for reading, and Happy Gnu Year.

Sharing with these kind party hosts: A Morning Cup of Joe, Sunny Simple Life, Life on Lakeshore Drive, Thoughts From Alice, Dwellings – The Heart of Your Home, Rustic and Refined, Kathe with an E, My Own Home